UK500KHZ Google Group

RE: 500KHz QRPp

2009-11-28T19:39:13Z

Hi John

Well that is what QRP is all about aye, pushing our luck.

I haven't mentioned the ERP, I recon 1.6mW at a push. Its still early
days re my antenna too, I aim to improve.

Thanks for looking.

Eddie

Re: 500KHz QRPp

2009-11-28T19:25:59Z

Hello Eddie,

Nothing seen of you on WSPR yet up in Shetland, but it's early days!

Judging from your reported S/N from MBU and XVL I guess I might be
pushing my luck, but I'm always willing to have a go!

Cheers,

John
GM4SLV

RE: 500KHz QRPp

2009-11-28T18:17:27Z

Alan, G4TMV.wrote

Hi Alan

No unfortunately I can't claim that one, I think that is G4JNT if so I
will be aprox 35Hz below.

Spectrum Lab has indicated on a 50Hz bar of some description which looks
like a continuous carrier, my QRSS FCW would be very visible at that

Re: 500KHz QRPp

2009-11-28T17:54:51Z

Hi Eddie,

Is the signal on the attached image yours, if so I am hearing it here
in Lancashire at the moment (IO83vp), and it's coming in quite well on
Spectrum Lab. (1736 to 1753utc).

73 for now, Alan, G4TMV.

500KHz QRPp

2009-11-28T16:57:12Z

Hi All

At last I have a reasonable efficient and mechanically stable tuning
coil on a small Marconi T Antenna.

I am running my QRPp MEPT on 503.815 KHz.

2009-11-28 16:20 G3ZJO 0.503815 -28 0 IO92ng 0.05 M0BMU IO91vr
76 143

2009-11-28 16:20 G3ZJO 0.503815 -26 0 IO92ng 0.05 G3XVL JO02nb

RE: No postings since September

2009-11-23T17:50:21Z

i post this message : i am QRV and waiting for QSO on 503 khz cw

my rig work in normal condition qso with g3kev : 550 km between our 2 stations

i am waiting for other qso

ON4KTJ JM

______________________________ ______________________________ _____
Nouveau Windows 7 : Simplifiez votre quotidien. Trouvez le PC qui vous convient.

RE: No postings since September

2009-11-23T00:22:48Z

Hi Eddie, Ken
Graham M0BMU ? ... = Jim Hi
It depends how Ken , is driving the TX ... as in the exciter ...
unless you have the right pic job, then you need to use the
ssb function of a normal rig .. with the added problem , if the
class e/d pa uses a logic drive , in that the rf carrier ends up

Re: No postings since September

2009-11-22T23:03:15Z

Hi Eddie, Ken

Graham M0BMU ? ... = Jim Hi

It depends how Ken , is driving the TX ... as in the exciter ...
unless you have the right pic job, then you need to use the
ssb function of a normal rig .. with the added problem , if the
class e/d pa uses a logic drive , in that the rf carrier ends up

RE: No postings since September

2009-11-22T22:05:08Z

Hi Ken
Thanks for the reply. I have changed my antenna, I don't know if it will
be for the worse but it tunes. I have dropped my 30m Dipole which is fed
from the upstairs shack. It's a sort of upside down Marconi T, the WX is
not suitable to do more work.
I should be able to copy your signal when you can get on for sure.

Re: No postings since September

2009-11-22T21:19:30Z

Hi. Eddie.
I am not yet set up for WSPR, only hand keyed cw, I would really like
to be on 500kHz more often, but because I am on the limits for
successful broadband I am restricted to late at at night, or I have to
to negotiate with the family for a broadband down time. I am using my
TS140 as the RX with a tunable pre-amp so should be able to receive

RE: No postings since September

2009-11-22T14:35:53Z

Hi Ken
Well they say that there is not much activity on the group. It's a shame
because I am already a bit fed up wit the moaners on the RSGB group.
QTH Northampton here IO92ng.
meter,
I am a QRP fan here I have 160mW of RF at 50 ohm so my ERP is minimal
particularly with my Doublet, like yours, feeder strapped, unfortunately

Re: No postings since September

2009-11-22T10:34:30Z

Hi Eddie.
Thanks for the reply, I cannot workout what is happening, your reply
came to the correct email address but the user name was not the one I
use for this address.
I am in Luton Bedfordshire locator IO91TV, where are you located?. The
TX N channel power MOSFET giving 20 watts into a 50 ohm power meter,

RE: No postings since September

2009-11-21T10:20:23Z

Hi Ken

Well I am doing well then, I only joined last night and I have got your
post already.
I will take this opportunity of saying Hi to everyone. I am currently
looking at running some QRP on 500KHz. I need to do some Antenna work.

Eddie G3ZJO

-----Original Message-----
Behalf Of hotman hotman

No postings since September

2009-11-21T10:00:04Z

Hello everyone, is this site still active as I have not receiced ant
postings since September?
73
Ken Wright
M0KHW

Re: View this page "500 KHz 'Grabbers'"

2009-10-22T17:55:55Z

G, et al

I still run it from time to time, but instead of uploading the images to
another website I use the inbuilt HTTP server in SpecLab and serve the
page locally from my PC. I'll try and remember to post a URL when it's
running, but I can't dedicate the RX and PC to it full time!

Cheers,