Got a tomtom 930 that I am gonna use on the bike too, got the cradle & everything, but i want the bit that goes onto the top of the steering head on the K12.
On Sat, 7 Nov 2009 16:27:07 -0000, "Nige" <de...@btinternet.com> wrote:
>Got a tomtom 930 that I am gonna use on the bike too, got the cradle & >everything, but i want the bit that goes onto the top of the steering head >on the K12.
>Any ideas where i can get one that isnt £50?
If it's only the ball mount you need then look up RAM-B-342U and see if it's what you're looking for.
They're about £15 and should do what you want. I've got one here that you can have for £10 if you want it but they're so cheap you may as well just google for a supplier and order one.
Andy Bonwick wrote: > On Sat, 7 Nov 2009 16:27:07 -0000, "Nige" <de...@btinternet.com> > wrote:
>> Got a tomtom 930 that I am gonna use on the bike too, got the cradle & >> everything, but i want the bit that goes onto the top of the steering >> head >> on the K12.
>> Any ideas where i can get one that isnt £50?
> If it's only the ball mount you need then look up RAM-B-342U > and see if it's what you're looking for.
> They're about £15 and should do what you want. I've got one here that > you can have for £10 if you want it but they're so cheap you may as > well just google for a supplier and order one.
I'll give you a tenner any day matey, saves fucking about.
>Andy Bonwick wrote: >> On Sat, 7 Nov 2009 16:27:07 -0000, "Nige" <de...@btinternet.com> >> wrote:
>>> Got a tomtom 930 that I am gonna use on the bike too, got the cradle & >>> everything, but i want the bit that goes onto the top of the steering >>> head >>> on the K12.
>>> Any ideas where i can get one that isnt £50?
>> If it's only the ball mount you need then look up RAM-B-342U >> and see if it's what you're looking for.
>> They're about £15 and should do what you want. I've got one here that >> you can have for £10 if you want it but they're so cheap you may as >> well just google for a supplier and order one.
>I'll give you a tenner any day matey, saves fucking about.
Have you checked that it's the right one for your bike?
It's small enough to post in a padded envelope at minimal cost so there's no point doing the 6 weeks to U/R it shit (unless someone's going from Bedford to your area very soon) but make sure it's the right one before I waste my time posting it.
Andy Bonwick wrote: > On Sat, 7 Nov 2009 16:55:01 -0000, "Nige" <de...@btinternet.com> > wrote:
>> Andy Bonwick wrote: >>> On Sat, 7 Nov 2009 16:27:07 -0000, "Nige" <de...@btinternet.com> >>> wrote:
>>>> Got a tomtom 930 that I am gonna use on the bike too, got the cradle & >>>> everything, but i want the bit that goes onto the top of the steering >>>> head >>>> on the K12.
>>>> Any ideas where i can get one that isnt £50?
>>> If it's only the ball mount you need then look up RAM-B-342U >>> and see if it's what you're looking for.
>>> They're about £15 and should do what you want. I've got one here that >>> you can have for £10 if you want it but they're so cheap you may as >>> well just google for a supplier and order one.
>> I'll give you a tenner any day matey, saves fucking about.
> Have you checked that it's the right one for your bike?
> It's small enough to post in a padded envelope at minimal cost so > there's no point doing the 6 weeks to U/R it shit (unless someone's > going from Bedford to your area very soon) but make sure it's the > right one before I waste my time posting it.
Just been to look, i dont think it is, mine screws into the headstock top nut on an inside screw thread & hasn't got that 'bit' of metal on it. they look like just a blob on the thing.
> Just been to look, i dont think it is, mine screws into the headstock top > nut on an inside screw thread & hasn't got that 'bit' of metal on it. they > look like just a blob on the thing.
nige, your after this part http://www.buybits.com/product/sku_3599.aspx its a threaded bolt with a rubber surround that gets compressed against the headstock 'tube' in the centre when you tighten the screw. -- Vass
>> Just been to look, i dont think it is, mine screws into the headstock top >> nut on an inside screw thread & hasn't got that 'bit' of metal on it. they >> look like just a blob on the thing.
>nige, your after this part >http://www.buybits.com/product/sku_3599.aspx >its a threaded bolt with a rubber surround that gets compressed against the >headstock 'tube' in the centre >when you tighten the screw.
Andy Bonwick wrote: >> nige, your after this part >> http://www.buybits.com/product/sku_3599.aspx >> its a threaded bolt with a rubber surround that gets compressed against >> the >> headstock 'tube' in the centre >> when you tighten the screw.
>>nige, your after this part >>http://www.buybits.com/product/sku_3599.aspx >>its a threaded bolt with a rubber surround that gets compressed against >>the >>headstock 'tube' in the centre >>when you tighten the screw.
> That's what I was offering him.
well if it will fit my R1 I'll have it off ya please -- Vass
In article <7llleoF3eef7...@mid.individual.net>, de...@btinternet.com says...>
> Got a tomtom 930 that I am gonna use on the bike too, got the cradle & > everything, but i want the bit that goes onto the top of the steering head > on the K12.
> Any ideas where i can get one that isnt £50?
Mine was £46 delivered (suspect could get cheaper elsewhere but it's a nice piece of work) and I only had 2 days before I *had* to have it.
>>>nige, your after this part >>>http://www.buybits.com/product/sku_3599.aspx >>>its a threaded bolt with a rubber surround that gets compressed against >>>the >>>headstock 'tube' in the centre >>>when you tighten the screw.
>> That's what I was offering him.
>well if it will fit my R1 I'll have it off ya please
Nige still has first shout on it but failing that I'll see if it'll be ok on Adies R1 and if it is then you've got it.
I'm not giving you a massive bargain btw but if you save a couple of quid and I get a couple of pints for something I'll not use then that's cool.
Jeremy wrote: > In article <7llleoF3eef7...@mid.individual.net>, de...@btinternet.com > says...> >> Got a tomtom 930 that I am gonna use on the bike too, got the cradle & >> everything, but i want the bit that goes onto the top of the steering >> head >> on the K12.
>> Any ideas where i can get one that isnt £50?
> Mine was £46 delivered (suspect could get cheaper elsewhere but it's a > nice piece of work) and I only had 2 days before I *had* to have it.
> Does BMW offer anything for this?
Fucking cuntsnakes, £46? I could get blown for that.
>>>>nige, your after this part >>>>http://www.buybits.com/product/sku_3599.aspx >>>>its a threaded bolt with a rubber surround that gets compressed against >>>>the >>>>headstock 'tube' in the centre >>>>when you tighten the screw.
>>> That's what I was offering him.
>>well if it will fit my R1 I'll have it off ya please
> Nige still has first shout on it but failing that I'll see if it'll be > ok on Adies R1 and if it is then you've got it.
> I'm not giving you a massive bargain btw but if you save a couple of > quid and I get a couple of pints for something I'll not use then > that's cool.
On 7 Nov, 23:17, "Nige" <de...@btinternet.com> wrote:
> Fucking cuntsnakes, £46? I could get blown for that.
You could make one surely? Rubber bung with a threaded insert in the yoke stem and a stud fitted to the ram ball and off you go. Probably get a shag in Bradford with the £30 change.
Nige wrote: > Got a tomtom 930 that I am gonna use on the bike too, got the cradle & > everything, but i want the bit that goes onto the top of the steering > head on the K12.
>> Nige still has first shout on it but failing that I'll see if it'll be >> ok on Adies R1 and if it is then you've got it.
>any news?
He's gone remarkably quiet so I'll have a look to see if it fits when I go home at the weekend. Email me your home address and if it fits I'll get it posted asap. We can sort out payment whenever.
|
