|
|
uk.rec.cycling |
In article <5t768fF1ckjb...@mid.individual.net>, Peter Scandrett
prgs-use...@scandrett.net says...
> I asked them what they'd done. They'd adjusted the end stops (again, Did they bend it or just rotate it around the frame tube? If they bent
> since that's what I'd been working with) but also bent the shifter thing
> in a bit, as had crossed my mind originally :-) It's reassuring to know
> that I was going along the right lines, anyway. It all seems to work OK now.
it they're nasty cowboys (unless they were just correcting existing
damage). The chainset needs to be properly aligned for good chain line,
not just to get the front changer working.
> The guy in the shop said that sometimes these things work on the jig but They should have road tested it anyway - there's no way you can tell if
> not out on the road
brakes or gears will work under load without trying them.