I have a slip stone that I inherited from my father and have now found a use for it - taking the burr off the inside of gouges after sharpening. The trouble is that the stone is dirty and is not effective. The dirt is black and shiny against the brown of the stone.
robgraham wrote: > I have a slip stone that I inherited from my father and have now found > a use for it - taking the burr off the inside of gouges after > sharpening. The trouble is that the stone is dirty and is not > effective. The dirt is black and shiny against the brown of the > stone.
On Sat, 7 Nov 2009 22:42:18 -0000, "Steve Walker" <spam-t...@beeb.net> wrote:
>robgraham wrote: >> I have a slip stone that I inherited from my father and have now found >> a use for it - taking the burr off the inside of gouges after >> sharpening. The trouble is that the stone is dirty and is not >> effective. The dirt is black and shiny against the brown of the >> stone.
>> Any suggestions ? Thanks >> Rob
>Scrub it clean with wire wool and a solvent ?
About all you can do. If it has been oiled, masses of soap and water will do little.
> I have a slip stone that I inherited from my father and have now found > a use for it - taking the burr off the inside of gouges after > sharpening. The trouble is that the stone is dirty and is not > effective. The dirt is black and shiny against the brown of the > stone.
> Any suggestions ? Thanks > Rob
IME ammonia is the best solvent for built-up or impacted oil or grease. The actual strength of the solution isn't critical around 50/50 seems to work fine. One of the few places you can still buy it neat is Homebase - around £2 a small bottle. It stinks to high heaven but will last for ages. Soak the slip overnight in that solution and it should come up fine without too much abrasion. Many window cleaners are rumoured to contain ammonia - ammonia is supposedly a magic cure for clogged Epson printers which is why I originally bought some - but its not explicitly stated on the label.
> > I have a slip stone that I inherited from my father and have now found > > a use for it - taking the burr off the inside of gouges after > > sharpening. The trouble is that the stone is dirty and is not > > effective. The dirt is black and shiny against the brown of the > > stone.
> > Any suggestions ? Thanks > > Rob
> IME ammonia is the best solvent for built-up or impacted oil or grease. > The actual strength of the solution isn't critical around 50/50 seems to > work fine. One of the few places you can still buy it neat is Homebase - > around £2 a small bottle. It stinks to high heaven but will last for ages. > Soak the slip overnight in that solution and it should come up fine > without too much abrasion. Many window cleaners are rumoured to contain > ammonia - ammonia is supposedly a magic cure for clogged Epson printers > which is why I originally bought some - but its not explicitly stated > on the label.
> michael adams
> ...
Many thanks guys - as always this group comes up with the required guidance.
>> > I have a slip stone that I inherited from my father
You've probably got your answer by now, but...
I inherited one too. I cleaned it by boiling it in water with a drop of washing up liquid. Took a couple of goes but its like new. Probably best to bring it to boil slowly to avoid any stresses and possible cracks. Mine is natural stone, not sure how some of the artificial ones might react to boiling.
> >> > I have a slip stone that I inherited from my father
> You've probably got your answer by now, but...
> I inherited one too. I cleaned it by boiling it in water with a drop > of washing up liquid. Took a couple of goes but its like new. Probably > best to bring it to boil slowly to avoid any stresses and possible > cracks. Mine is natural stone, not sure how some of the artificial > ones might react to boiling.
I was thinking dishwasher, but I dont know if some aren't stone.
> > >> > I have a slip stone that I inherited from my father
> > You've probably got your answer by now, but...
> > I inherited one too. I cleaned it by boiling it in water with a drop > > of washing up liquid. Took a couple of goes but its like new. Probably > > best to bring it to boil slowly to avoid any stresses and possible > > cracks. Mine is natural stone, not sure how some of the artificial > > ones might react to boiling.
> I was thinking dishwasher, but I dont know if some aren't stone.
> NT
I used some petrol and steel wool and that seems to have brought it up nicely. Fortunately the muck was on the surface and not through to stone as I feared.
|
