> Just installed 2.9.8 and noticed the following problems (do not know > if problems exist on previous releases)
> (1) OCONV("3031234567","ML(###)###-####") results in ... 30)312-3456
See the PICK.ML.CONV.MASK mode of the OPTION command for the solution.
> (2) When telneting remotely (not localhost), when pressing <RETURN> > from TCL command line, the current line seems to 'clear' and then > 'redisplay'
If this happens it is because the panning command line feature may need to repaint the line. Even if it is happening, I am surprised that you can see it. Are you on a very slow connection?
Martin Phillips Ladybridge Systems Ltd 17b Coldstream Lane, Hardingstone, Northampton, NN4 6DB +44-(0)1604-709200
> Just installed 2.9.8 and noticed the following problems (do not know
> if problems exist on previous releases)
> (1) OCONV("3031234567","ML(###)###-####") results in ... 30)312-3456
> (2) When telneting remotely (not localhost), when pressing <RETURN>
> from TCL command line, the current line seems to 'clear' and then
> 'redisplay'
> > Just installed 2.9.8 and noticed the following problems (do not know
> > if problems exist on previous releases)
> > (1) OCONV("3031234567","ML(###)###-####") results in ... 30)312-3456
> See the PICK.ML.CONV.MASK mode of the OPTION command for the solution.
> > (2) When telneting remotely (not localhost), when pressing <RETURN>
> > from TCL command line, the current line seems to 'clear' and then
> > 'redisplay'
> If this happens it is because the panning command line feature may need to
> repaint the line. Even if it is happening, I am surprised that you can see
> it. Are you on a very slow connection?
> Martin Phillips
> Ladybridge Systems Ltd
> 17b Coldstream Lane, Hardingstone, Northampton, NN4 6DB
> +44-(0)1604-709200
> However, I believe that the solution for problem 1 is to have an
> option for PICK.ML.CONV.MASK.
> I have this turned on for my system.
> I just tested this on a prebuild of 2.9-9 and it works fine.
> Here are the results:
> (303)123-4567
> Eugene
> P.S. Are you located in CO ?
> On Nov 3, 11:58 am, glh <g...@unaweep.com> wrote:
> > Just installed 2.9.8 and noticed the following problems (do not know
> > if problems exist on previous releases)
> > (1) OCONV("3031234567","ML(###)###-####") results in ... 30)312-3456
> > (2) When telneting remotely (not localhost), when pressing <RETURN>
> > from TCL command line, the current line seems to 'clear' and then
> > 'redisplay'- Hide quoted text -
> On 3 Nov, 10:28, eppick77 <eppic...@yahoo.com> wrote:
> > I can not speak to problem 2.
> > However, I believe that the solution for problem 1 is to have an
> > option for PICK.ML.CONV.MASK.
> > I have this turned on for my system.
> > I just tested this on a prebuild of 2.9-9 and it works fine.
> > Here are the results:
> > (303)123-4567
> > Eugene
> > P.S. Are you located in CO ?
> > On Nov 3, 11:58 am, glh <g...@unaweep.com> wrote:
> > > Just installed 2.9.8 and noticed the following problems (do not know
> > > if problems exist on previous releases)
> > > (1) OCONV("3031234567","ML(###)###-####") results in ... 30)312-3456
> > > (2) When telneting remotely (not localhost), when pressing <RETURN>
> > > from TCL command line, the current line seems to 'clear' and then
> > > 'redisplay'- Hide quoted text -
I have taken a look at the way in which the command processor repaints the line on entering a command to ensure that the panning command line is correctly displayed. I can see that we could optimise it a bit to remove the repaint if the line is not panned and the command is not bing recalled from the command stack but I am still surpised that you notice anything on the terminal.
What terminal emulator do you use and what terminal type have you selected?
Martin Phillips Ladybridge Systems Ltd 17b Coldstream Lane, Hardingstone, Northampton, NN4 6DB +44-(0)1604-709200
Using Accuterm as the terminal emulator. Have tried numerous term
types (vt100,vt320, vp series, etc.)
all with the same result. Again, whats unusual is that the localhost
connection (also using Accuterm with one
of the aforementioned term types) does behave correctly.
Thanks,
Gary
On 4 Nov, 05:24, "Martin Phillips" <martinphill...@ladybridge.com>
wrote:
> I have taken a look at the way in which the command processor repaints the
> line on entering a command to ensure that the panning command line is
> correctly displayed. I can see that we could optimise it a bit to remove the
> repaint if the line is not panned and the command is not bing recalled from
> the command stack but I am still surpised that you notice anything on the
> terminal.
> What terminal emulator do you use and what terminal type have you selected?
> Martin Phillips
> Ladybridge Systems Ltd
> 17b Coldstream Lane, Hardingstone, Northampton, NN4 6DB
> +44-(0)1604-709200
It's probably not worth taking this any further as we have made a change for release 2.9-9 (this week if all goes to plan) that will not repaint the line unless it needs to do so to show the command correctly after use of panning, an overlong command or recalling a command from the history.
Martin Phillips Ladybridge Systems Ltd 17b Coldstream Lane, Hardingstone, Northampton, NN4 6DB +44-(0)1604-709200
> It's probably not worth taking this any further as we have made a change for
> release 2.9-9 (this week if all goes to plan) that will not repaint the line
> unless it needs to do so to show the command correctly after use of panning,
> an overlong command or recalling a command from the history.
> Martin Phillips
> Ladybridge Systems Ltd
> 17b Coldstream Lane, Hardingstone, Northampton, NN4 6DB
> +44-(0)1604-709200
|
